Development and completion of a PCB board for the RL01/RL02 disk emulator

Further informations:
A detailed description, User Manual: README
New: 5 bootable RL-emulator images : emulator-images
Circuit diagram and layout information: RL_Emulator_v2_1
Circuit diagram and layout information: RL_Emulator_v2_2

Support SELECT und WLAN Mode
Version V2.2 DE10_UserManual_V2.2 with flash folder
Open_Source project folder based on Quartus V16.1 environment
Convert/verify .DSK <==>.DEC files: RL_tools

MAX10 / DE10-Lite Implementierung
64MB memory, emulates simultaneously up to 4 RL01 or RL02 disk drives.

Project folder @ GitHub (is gone)

BeMicro CV Implementation
128MB memory, emulates simultaneously up to 4 RL01 or RL02 disk drives, sorry, not available at the moment ?? (MAY 2017)

Flash folder: BeMicro_flash

DE0-Nano Implementation
E16MB memory, emulates 1 RL01 or RL02 disk drive

Flash folder: DE0_Nano_flash

DE1 Board Implementation
emulates only 1 RL01 disk drive

Our emulator interface also works with this relatively old DE1 board but there are some limitations due to the only 8MB SDRAM memory: - Only support of one RL01 disk drive. RL02 support not possible. - No FAT32 support for the SD-Card and incompatible file format. For further questions about this DE1 configuration, please send an e-mail.

DE0-Nano-SoC Board Implementation
This is the configuration based on the DE0-Nano-SoC board. It will probably be available in early of 2018 in the first version.

The entire project was ported successfully, but unfortunately the DE0-Nano-SoC board is no longer available. As mentioned above, a port to the DE10-Nano board was successfully completed.

In the end, this was my last wire wrap work.